“Rounded edge” can describe several different parts of a stone table. It might mean the tabletop's corners in plan, the profile along its perimeter, or the transition between the top and side surface. Before ordering, make sure the drawing shows the particular detail you are discussing.
Separate the outline from the edge profile
The outline is the shape seen from above: round, oval, rectangular or another form. The edge profile is the shape seen in a section cut through the perimeter. A table can have softened corners when viewed from above and a different treatment along the thickness of the top.
The SquareSoft Square Travertine Coffee Table illustrates why both views are useful. Its rounded-corner outline is a visual reference for the design; the selected product's drawing should resolve the dimensions and edge detail. Do not use a photograph to assign an exact radius.
Ask for the detail in the right view
| Question | Useful reference |
|---|---|
| How do the corners turn? | A plan view showing the outline and any specified corner dimensions. |
| What does the perimeter feel and look like? | An edge section identifying the requested profile. |
| How thick will the top appear? | A section distinguishing the visible edge from the overall construction. |
| Which surfaces receive the selected finish? | A written finish note covering the top, edge and any visible underside. |
Names such as eased, bevelled or rounded are useful starting points for a conversation, but a name alone may not describe the exact result you expect. If the edge is an important design feature, ask the supplier which drawing or representative detail can be used to confirm it.
Connect the detail to the way the table is used
Consider where people sit, where hands meet the edge and which parts are visible from the sofa or doorway. For a dining table, check the underside relationship with the chosen chair arms. For a low coffee table, review the perimeter from normal seated height as well as from above.
Keep appearance questions separate from strength, support and handling. A thicker-looking edge does not establish the table's structural performance, and a rounded appearance is not a safety certification. Ask the supplier to confirm suitability for the selected design rather than assuming an edge change is purely cosmetic.
Make the final note specific
Record the product or drawing revision, the edge detail being selected and the surfaces covered by the finish. If a requested change is unavailable for the model, compare the offered alternative before confirming the order.
Use the materials and finishes overview to start the visual discussion, then keep the confirmed edge detail with your final specification.
